USE: Stone Sealant is designed for waterproofing plaster and concrete Stone Cladding, Stacked Stone tiles and Brick Slips, as well as sandstone, clinker and roof tiles. The surface must be dry. Remove all dust, dirt, oil, grease, etc. Surfaces that are not to be waterproofed, such as glass, metal parts, wood, polished stone, etc., must be carefully protected. Stir well or shake the container before using. Our Stone  tiles should be waterproofed together with joints at least 7 days after mounting. Apply in dry weather, at temperatures from +5 to +25°C.

NOTE: Impregnation may change the shade of the tile. It is recommended to first make a test on an unmounted tile or in a hardly visible place to check if the color change is acceptable.

METHODS OF APPLICATION: For Gypsum Based Stacked Stone tiles, apply once by spraying.

For concrete and other types of tiles, apply with brush or spray. Apply evenly. On high-absorbent concrete surfaces, apply twice wet-on-wet (the extra layer should be applied not later than after 20 minutes, depending on surface absorption and temperature). The waterproofed surface should be thoroughly and evenly saturated with the product.

COVERAGE: 6-8 sqm per package for single application. The coverage depends on surface absorption and application technique.

STORAGE: Store in a dry place at +5 to + 30°C in original packaging. Shelf life: 12 months from the date of production (shown on the package).